技术文章

2007澳门太阳集团CONTACT

湖北德普电气股份有限公司

天 址:襄阳市高新区(自贸区)叶店路16号
电 话:0710-3276513传 实:0710-3276513
邮 箱:xfdpxs@126.com
网 址:www.techpow.com.cn
天下同一服务热线:400 0710 600



武汉德普新源科技有限公司

地点:武汉东湖高新技术家当开发区华师园北路6号
电话:027-81610218
传真:027-81610218



湖北德普智能设备有限公司

地点:湖北省襄阳市高新区(自贸区)叶店路16号
电话:0710-3357890

澳门太阳集团娱乐2007

您当前的位置: > 技术文章 > 技术文章

充电电池根基测试

上传工夫:2017-04-18浏览次数:编纂:admin
Contents:
-EN61951-1:2003
Secondary cells and batteries containing alkaline or other non-acid electrolytes-Portable
sealed rechargeable single cells
Part1:Nickel-Cadmium
露碱性或其他非酸性电解质的二次电池和蓄电池.便携密封可再充电单电池39555红太阳开奖效果
第1局部_镍镉电池.
-EN61960:2004
Secondary cells and batteries containing alkaline or other non-acid electrolytes-
Secondary lithium cells and batteries for portable applications
装有碱性或别的非酸性电解液的蓄电池和电池组用于便携式的充电锂电池和电池组
-ANSI C18.2M
PART1: American national standard for portable rechargeable cells and
batteries-General specifications
第一部分:便携式充电电池的美国尺度-一样平常要求2138com太阳集团
-Battery Dimension
电池尺寸39555红太阳开奖效果
EN61951-1:2003
Secondary cells and batteries containing alkaline or other non-acid
electrolytes-Portable sealed rechargeable single cells
Part1:Nickel-Cadmium
露碱性或其他非酸性电解质的二次电池和蓄电池.便携密封可再充电单电
第1局部_镍镉电池.
5.3 Marking
标识
7.1 Charging procedure for test purposes
充电的测试流程
7.2.1 Discharge performance at 20℃
20℃环境温度下的放电机能
Marking
标识
Each jacketed cell supplied without connections shall carry durable markings giving the
following minimum information:
每一个零丁电池要供应最少包孕以下信息的历久标识:
-Sealed, rechargeable nickel-cadmium or Ni-Cd
密封的,可充电的镍镉
-Cell designation
电池范例
-Rated capacity
额定容量
-Nominal voltage
标称电压
-Recommended charge rate and time or permanent charge current for “T” cells
关于T电池(估计在到达40℃高温下永远充电的电池),发起的充电速度和工夫或永远充电电
-Polarity
极性
-Date of manufacture (which may be in code)
生产日期(能够运用代码)
-Name or identification of manufacture or supplier
制造商或供应商的称号或身份辨认
 7.1Charging procedure for test purposes
充电测试流程
Unless otherwise stated in this standard, the charging procedure for test
purposes shall be carried out in an ambient temperature of 20℃±5℃ at a
constant current of 0.1ItA for 16h(It A=CnAh/1h)
除非本尺度特别阐明,充电顺序是在20℃± 5℃环境温度和0.1ItA的恒电流下充
电16h.
Prior to charging, the cell shall have been discharged in an ambient
temperature of 20℃±5℃, at a constant current of 0.2ItA down to a final
voltage of 1.0V
充电前,电池在20℃±5℃环境温度下且在0.2ItA的恒电流下已放电到停止电压为
1.0V
 7.2.1 Discharge performance at 20℃
20℃环境温度下放电机能
The cell shall be charged in accordance with 7.1.After charging, the cell shall be
stored, in an ambient temperature of 20℃±5℃,for not less than 1h and not
more than 4h
电池根据7.1条目充电,充电后,要将电池在20℃±5℃环境温度下存放1~4h
The cell shall be discharged at 0.2It A rate in an ambient temperature of
20℃±5℃ to a final voltage of 1.0V, if the test is based on the rated capacity
C5Ah(5 is the time base in hours for which the capacity is declared), the
minimum discharge duration shall be 5h
电池在20℃±5℃环境温度下且在0.2ItA的恒电流下放电到停止电压为1.0V
,若是测试是凭据额定容量C5Ah(5示意声称容量的放电工夫基数以小时示意)去进
止的,放电工夫不克不及小于5h.
Secondary cells and batteries containing alkaline or other non-acid
electrolytes-Secondary lithium cells and batteries for portable applications
装有碱性或别的非酸性电解液的蓄电池和电池组用于便携式的充电锂电池
和电池组
5.3 Marking
标识
7.1 Charging procedure for test purposes
充电的测试流程
7.2.1Discharge performance at 20℃(rated capacity)
20℃环境温度下的放电机能(额定容量)
 Marking
标识
Each cell or battery shall carry clear and durable markings giving the following information:
每一个电池应根据以下信息供应清楚,历久的标识:
-Rechargeable Li or Li-ion;澳门太阳集团娱乐2007
可交换的锂或锂离子
-Battery or cell designation (e.g.ICR19/66)
电池范例
-Polarity
极性
-Date of manufacture (which may be in code)
生产日期(能够用代码示意)
-Name or identification of manufacture or supplier
制造商或供应商的称号或身份辨认
Battery markings shall provide the following additional information:
电池标识要供应以下分外信息:
-Rated capacity
额定容量
-Nominal voltage
标称电压
7.1 Charging procedure for test purposes
充电测试流程
Prior to charging, the cell shall be discharged at 20℃±5℃, at a constant
current of 0.2It A down to a specified end -of -discharge voltage.
充电前,电池要在20℃±5℃环境温度和在0.2ItA的恒电流下放电到停止电压为
1.0V
Cells or batteries shall be charged, in an ambient temperature of 20℃±5℃,
using the method declared by the manufacture.
电池在20℃±5℃的环境温度下运用制造商声称的要领充电
7.2.1 Discharge performance at 20℃(rated capacity)
20℃环境温度下的放电机能(额定容量)
Step1-The cell or battery shall be charged in accordance with 7.1
步调1-电池凭据7.1条目充电
Step2-The cell or battery shall be stored , in an ambient temperature of20℃±5℃ ,
for not less than 1h and not more than 4h
步调2-电池在20 ℃±5℃ 的环境温度下存放,工夫在1h~4h
Step3-The cell or battery shall be discharged, in an ambient temperature of 20
℃±5℃ , at a constant current of 0.2It A, until its voltage is equal to the
specified end-of-discharge voltage.
步调3-电池在20 ℃±5℃ 的环境温度下且在0.2It A的恒电流下放电直到电压到达特
指的停止电压
Step 4-The capacity (Ah) delivered during step 3shall be not less than 100%of the
rated capacity declared by the manufacture. Steps 1 to 4 may be repeated
up to four additional times, as necessary to satisfy this requirement.
步调4-在步调3中获得的容量不克不及小于制造商声称的100%的额定容量。为了知足本要求,
1到4步调能够再反复停止四次
C18.2M PART1: American national standard for portable
rechargeable cells and batteries-General specifications
ANSI C18.2M 第一部分:便携式充电电池的美国尺度-一样平常要求
method: Charge for 20h at 0.1C-rate. Let rest 1h.
充电要领:电池在0.1C下充电20h,停放1h
Rated Capacity and service life: Discharge at 0.2C-rate until terminal
voltage=cut off voltage (EODV) of 1.0V/cell.Calculate and report capacity. Shall
meet or exceed claimed capacity.
额定容量和使用寿命:在0.2C下放电直到停止电压为1.0V,盘算容量,现实容量
应知足或凌驾声称容量值
Dimension电池尺寸 :
1. Cylindrical cells dimensionally interchangeable with primary battery
在尺寸上取原电池可交换的圆柱形电池(Ni-Cd)
Standard: in accordance with IEC60086-2
尺度:凭据IEC60086-2
Designation: R03(alson known as AAA), R6(alson known as AA)39555红太阳开奖效果
范例:R03(在某些国度也称作AAA), R6(在某些国度也称作AA)
Dimensional drawings as figure 1&2
尺寸图表示如图1&2
Specifications as table1
尺寸要求如表1
2138com太阳集团
Table 1
Note:
A-maximum overall height of the battery
电池整体的最大高度
C-minimum outer diameter of the negative flat contact surface
阴极平面的最小外径
F-maximum diameter of the positive contact within the specified projection height
阳极打仗的最大直径
G-minimum projection of the flat positive contact
阳极打仗的最小凸起高度
Φ-maximum and minimum diameters of the battery
电池的最大和最小直径
2. Cells not dimensionally interchangeable with primary batteries
取原电池不克不及在尺寸上交换的电池(Ni-Cd)
Standard: in accordance with EN61951-1:2003
Dimension is as the following table 2
Table 2
3. Standard secondary lithium cell dimension:
尺度的可充电的锂电池尺寸(listed in Table 3)
Standard: in accordance with EN61960-1:2004
Table 3
关于我们 39555红太阳开奖效果 研发中央 德普智能 澳门太阳集团娱乐2007 产物运用 2007澳门太阳集团 技术文章

公司地址:襄阳市高新区(自贸区)叶店路16号 服务电话:400 0710 600
Copyright © 2015-2018 湖北德普电气股份有限公司 版权所有

X请用手机扫描微疑二维码

39555红太阳开奖效果